Welcome to RTM
Welding tools, MAPP Gas, Hand Torch, Manifold,Vacuum Pump, Testing Instrument, Charging Scale, Gas Leak Detector,
Tubing Tools, Tube Cutter, Tube Bender, Tube Expander
0086-574-27866853
PVC Pipe Cutter RTM-PC-204
Use:
Apply to water pipe,aluminum plastics pipe,gas pipe,electrical appliance pipe and other plastics pipeline.(Not to be applied on electric cable line and steel pipe)
Abilty of cut off:
Normal pipe. VP30
Water course pipe. VW30 Scope of out 36mm
Electrical appliance pipe. VP35
Attention:
When product used in winter,the pipe would be put in the lukewarm water for heating at first.To avoid burst because of cold and fragile at cutting. If the edge of a cutter appeared wear and tear at using. Loose the fixed screw and buy the same type of pipe blade for change after using,we should push down the handle and spread on rustproof oil.Product apply to rigid plastics pipe or aluminum plastics pipe,but not to be applied on electric cable line and steel pipe to avoid to cause cutter damaged seriously.
Method of use as follow:
1.Press the open button with thumb,according to the picture1.
2.Put the pipe diameter below 42mm in cutter,push down handle
repeatedly,forthwith cut off.
3.After cutting,clean the blade with rustproof oil,close the handle for ready use nest time.

|
Model |
SPEC(mm) |
QTY PER CARTON(pcs) |
G.W/N.T(kg) |
PACK.DIEM(cm) |
|
RTM-PC-204 |
36 |
48 |
24.5/23 |
65.5x36.5x31 |
|
RTM-PC-204 |
36 |
50 |
25/24 |
73.5x33x32.5 |









